Plant manufacturer presents its product range at the trade fair
The hot washing system for polyolefins is one of the product innovations presented by Herbold Meckesheim at IFAT Munich. Hot washing results in qualities of recyclates that are suitable for use in the food sector. At booth 153 in hall B5, IFAT trade fair visitors can become familiar with the machine builder’s modular systems from Monday, May 30, to Friday, June 3.
With its system solutions for automated plants, Herbold Meckesheim can respond quickly and flexibly to customer requirements. The recycling lines are built around the hydrocyclone stage with its high density separation – due to the strong centrifugal forces in the hydrocyclone, a separation effect is achieved that exceeds conventional processes by a factor of 15.
The first process stage of a recycling plant for washing, separating and drying is often a shredder such as the Herbold single-shaft shredder 60/210, which is suitable for both dry and wet operation. The treatment of post-consumer material demands shredders that can handle entire bales with a high degree of contamination and various disturbing impurities. At the same time, the machines should be wear-resistant and simple to operate and maintain.
Figure 1: Washing systems for plastics are in focus at Herbold Meckesheim’s booth at IFAT Munich.
Photo: Herbold Meckesheim
The shredder is usually followed by the multi-stage pre-washing unit VWE, which captures coarse impurities and reduces mineral fraction. Friction washers such as the FA 3000 are used to dewater and clean the ground material, for example from films or rigid plastics. Odors and adhesives can be removed by a Herbold hot washing with adjustable temperatures and dwell time and with the addition of suitable detergents. Machine solutions such as the T 2016 are used for mechanical drying. A two-stage thermal dryer completes the process in such a way that only low residual moisture remains. For materials with poor flow properties, a silo of the HRS type is appropriate.
Figure 2: Thanks to its modular plant and process stage concepts, Herbold Meckesheim is able to flexibly implement customer requirements.
Graphic: Herbold Meckesheim
Visitors to IFAT can find out how machine solutions are further developed and tested at Herbold’s own technical lab in Meckesheim. These include series such as the SB granulators with forced feeding or plastic compactors such as the HV 70. In its modular plant and process stage concepts, the machine builder relies on a high degree of automation that can cope with heterogeneous feed materials, thus avoiding downtimes and helping to keep personnel costs low.
Herbold Meckesheim is also participating in the VDMA Plastics Recycling Theme World at IFAT Munich, which illustrates circular economy and plastics recycling at the booth of the Association of German Machine Builders.
IFAT Munich, May 30 to June 3, Hall B5, Booth 153
Herbold Meckesheim is leading recycling specialist for the plastics industry. Worldwide, the plants ensure that plastic waste is reduced through recycling. Both the pure waste from the plastics processing industry and used, mixed and contaminated plastics are processed. Machines from Herbold Meckesheim are also used in the fine grinding of plastic granulates and waste or in the waste processing, raw material recovery and material preparation of various industrial processes. Another special feature is the development of the machines in the company’s own pilot plant. Herbold Meckesheim is today managed in the fourth generation by Karlheinz and Werner Herbold. More than 220 employees at the headquarters and the staff of the international agencies accompany machines that are custom-made to fit the requirements from the conception stage through commissioning to the end of their commercial use.